PRODUCTS

    Machine introduce

    The Gold RF microcrystals combine four technologies: insulating microcrystalline, high temperature RF, vacuum adsorption and transdermal administration,Using vacuum adsorption technology to achieve safer treatment, Freely set the insulation microcrystalline head to penetrate into the target tissues at diferent depths of the skin(0.5-2.0mm-3.5mm).Without damaging the epidermis, Through  the microcrystalline head Penetrats the epidermis, and directly transmitted high temperature RF energy to the deep dermis,Instantly and efficiently activate skin collagen and fibers,Promote the regeneration and rapid recombination of collagen fibers,It can completely repair the damaged skin cells, effectively destroy the secretion of sebaceous glands and inhibit inflammation, and eliminate acne bacilli---thus reduce oil secretion, significantly improve pore size, effective treatment of inflammatory acne ect. According to the different symptoms of rough and loose skin, fine lines and wrinkles, acne scars, scars, stretch marks and other symptoms, personalized skin beauty is carried out.

    By adjusting the length of microcrystalline, the RF can be released to the depth of sweat glands, thus destroying the redundant apocrine glands (apocrine glands) and eccrine glands - solving the problems such as bromhidrosis.

    the penetration of microcrystalline , open the skin quickly absorption channel,It can directly introduce the repair solution, antioxidant and other drugs into the deep layer of the skin, further play the role of active ingredients and drugs, further repair the skin, and achieve the purpose of 1 + 1 > 2.

    Gold radio frequency microcrystalline vsDot matrix laser difference

    1. the high frequency crystal head is formed by the crystal depth of physical properties, forming heating and solidification fields.

    2. gold RF microcrystalline target depth and required energy can be finely regulated.

    3. laser scattering, but it is difficult to reach the target depth (target 2mm), and the absorption of energy within the skin tissue can not be correctly predicted, often occur side effects such as hormonal disturbances.

    4., heating through the epidermis, and a longer rest, and it is difficult to calm.

    5. lattice laser a course of care time must be reached (3~5 times), while relative to laser RF-Needle is according to the circumstances may need (1~3 times) care.

    4D and radar carving use the cartridges with different depths (face 1.5, 3.0, 4.5mm) to focus the accurate energy on the epidermis layer, collagen layer and fascia layer;4.5mm is positioned on the subcutaneous fascia layer, and the fascia layer at the focus produces protein solidification reaction, so as to generate tension around the freezing point, playing the role of pulling the growth of muscle in the fascia layer to achieve the best effect of shaping, lifting and tightening;3.0mm acts on the collagen layer under the skin to stimulate the collagen regeneration and recombination. The newly generated collagen can gradually tighten and enhance the skin from the inside, and recover the elasticity;Aiming at the problem of facial relaxation and sagging, such as the formation of wrinkles.the whole part is pulled up in a single operation to achieve the overall contour lifting and tightening.In addition, the cartridges with different depths are used to treat obesity and chest, locate the body fat layer, tighten the skin and dissolve fat.Radar carving uses a fine cartridge in the way of rubbing and looping ,and the operation is fine and 360° without dead angle, so that the concentrated energy can reach each part evenly to make it get a better effect.

    Liposonic use the body cartridges with different depths (0.6cm, 0.8cm, 1.0cm, 1.3cm, 1.6cm), transforms into 65-70 degree heat energy to break and dissolve fat cells by focusing ultrasonic.The intelligent positioning system locates the required fat cells, quickly crushes and dissolves large granular fat cells to reduces the amount of fat, while stimulating collagen contraction and proliferation,and quickly filling the gaps that appear after the fat is ablated.After treatment, the skin surface is thin and not wrinkled, and it will not cause damage to the epidermis, blood vessels, nerves and muscle tissues. The crushed fat will be excreted from the body as the body metabolizes.It works at once.It destroys subcutaneous fat, directly reduces the amount of fat without rebounding.One hour course of treatment can reduce the average body circumference by 2-6cm, which can show multiple effects of reducing fat, tightening skin and shaping. For local obesity, it needs 1-3 times to achieve the desired effect.

    Vaginal tightness is the use of different depths (3.0mm, 4.5mm) of therapeutic cartridges to focus the accurate energy on the vaginal collagen layer and fascia layer. It uses focused ultrasound to produce a thermal effect of 65 ° ~ 70 ° to promotes the reconstruction of collagen fibers and tendons in the deep vaginal mucosa and tight the contraction of fascia layer,which increase the production of new and tender tissues, changing the vaginal dryness, promoting vaginal mucus secretion during sex, and making sure that the vagina is moist and tender.It’s mainly aimed at the problem of vaginal tissue rupture, damage, dryness, urinary incontinence, relaxation and other problems, triggering the body to initiate the function of repairing regenerative cells.Finally, the purpose of relieving and solving vaginal relaxation is achieved. Because the energy is passing through the epidermis, there is no need to worry about the injury of the mucosal layer, and no worry about the infection caused by the injury of the mucosal layer! The functional instrument of vaginal tightness  extends the cartridge into the vagina through the operator,which evenly acts on 54-216 line (about 1350-5400 points) in the SMAS layer in the vagina to achieve the best effect of contracting the vagina.

    Technical Principles

    Welcome to use our company's latest products  (Radar Carving + 4D multi-row+Liposonic+Vaginal tightness +Detection )  :5 in 1 beauty instrument. It is a multi-row fixed-point + 360 ° non dead corner+custom point + 360 ° 3D surround technology.

    4D muti-row and radar carving are more authoritative and higher-end anti-aging system instrument after the continuous thermage、ultrasonic beauty machine,which replaces various effects of traditional facial anti-aging wrinkle surgery - including face-lifting, removing double chin, lifting firmness, removing wrinkles, tightening the skin, etc. It completely solve the problem of aging and sagging on the face and body parts, and recreate the contours to restore the youth! Compared with previous single-line technology ,the effects is more durable.

    Liposonic is a local fat-dissolving instrument used for obesity caused by fat accumulation in the waist, abdomen, back, hands, legs, buttocks.It’s different from traditional methods of reducing weight. It pays more attention to non-invasive local fat elimination rather than replacing liposuction, but provides a safer solution than traditional liposuction. Vaginal tightness is a more authoritative and high-end anti-aging shrinking instrument after the private laser, It’s a comprehensive treatment aimed at solving the problems of female vaginal tissue rupture, damage, dryness, and relaxation.This technology is non-invasive, no bleeding, no operation, no  scars, no trauma with high safety, it don’t affect the normal life and work.

    Technical Parameters

    Product name:              SIX-IN-ONE(Liposonic+ 4D+Radar Carving+Privacy+Detection function+RF)Input voltage:    AC110V - 220V
    Output power:           10-200WFuse:5A
    Flightcase size:    31×44×50cmWeight:About 14kg(Excluding base)
    Base size:         73×51×17cmBase weight:About 10kg

    Treatment effect

    Company Service
    Disclaimer
    The effects of using the instrument on different human bodies and in different environments are different. We do not guarantee 100% effectiveness.
    Payment and shipping
    After received full payment.(Bank transfer . Western union . Paypal ). Will prepare the machine (need around 3-5 days). Then we will using DHL /Fedex /UPS shipping machine to you (around 7-9 days arrived)
    Free Service
    We can add your logo in machine and machine screen for free. We can set machine language to you for free .
    Training
    We will provide the operation manual and the operation video to you. You can operate machine according it. Also supply one to one operation training service. It's very easy to operate, please don't worry .
    After Sales Service
    We have one years of free after-sales service and we provide all technical support for the life of the machine without worrying.
    Certification
    Our machines have passed CE certification, ISO 9001 quality certification.
    ZHENGZHOU MESCIEN ELECTRONIC TECHNOLOGY CO LTD
    Get In Touch
    Mescien offers customization. Committed to ODM&OEM customization services. Machines can be designed according to your needs.
    We look forward to working with you and meeting your unique requirements effectively. Contact us now to explore our comprehensive range of products and take your business to new heights!