PRODUCTS

    Machine introduce

    Laser Tattoo Removal Machine is a laser with a pulse duration (pulse width) emitted by each laser reaching the picosecond level; the most advanced technology is used to treat pigmented diseases. Through fast and powerful energy, the pigment in the skin is smashed more finely, and then the principle of lymphatic drainage is used to completely remove tattoos and stains. Therefore, the treatment process is shortened from the original 10 times to the treatment process of 2-3 times, and the dermis is not damaged, the possibility of side effects is reduced, and the success rate of the operation is improved.

    Technical Principles

    Conversion relationship between time units:

    1 second = 1000 milliseconds (Millisecond)

    1 millisecond = 1000 microseconds (Microsecond)

    1 microsecond = 1000 nanoseconds (Nanosecond)

    1 nanosecond = 1000 picoseconds (Picosecond)

    As the name implies, a picosecond laser is a laser with a pulse duration (pulse width) of the picosecond level emitted by each laser.

    According to the principle of selective photothermolysis, the shorter the action time of the laser, the less likely the laser energy absorbed and accumulated in the target tissue will spread to the surrounding tissue, and the energy will be limited to the target to be treated to a certain extent, protecting the surrounding area. normal tissue, the more selective the treatment is. The pulse width of the picosecond laser is only 1% of that of the traditional Q-switched laser. Under this ultra-short pulse width, the light energy cannot be converted into heat energy, and almost no photothermal effect is produced. The photomechanical effect is blasted and torn into pieces, and the selectivity is stronger, which can make pigmented skin lesions produce stronger curative effect under shorter treatment times. In one sentence, "Picosecond lasers break down pigment particles more thoroughly, while causing less damage to surrounding tissue."

     If we compare the original pigment particles to rocks, the traditional Q-switched laser can crush these rocks into the size of pebbles, and after using the picosecond laser, they can be crushed into fine sand, so that the absorption efficiency of pigment fragments is reduced. Greatly improved.

    Treatment range

    Endogenous pigmented skin lesions: Ota nevus, Ito nevus, Mongolian spots, zygomatic brown cyan nevus, café-au-lait spots, freckles, seborrheic keratosis, spotted nevus, junctional nevus, melanosis, blue nevus, inflammation Post-pigmentation, chloasma, etc.

    Exogenous pigmented skin problems: tattoos, eyebrows, eyeliners, lip lines and traumatic tattoos and other pigmented skin lesions.

    With the special treatment head, it can easily achieve the effects of skin rejuvenation, pore reduction, dark spots lightening, whitening, blackhead removal and oil control (black-faced doll).

    Effective treatment of chloasma: The laser freckle and skin beauty system adopts the chronic peeling treatment method to lighten the pigment, and uses the mature Q-switch technology to blast the pigment cells with a wavelength of 1064nm in a very short period of ns level, and gradually fades after repeated treatments. Pigment, so as to achieve the purpose of treating melasma.

    Efficacy of black face doll: whitening and beautifying skin: lightening spots, improving skin tone, removing yellowing and blackening, anti-aging and rejuvenation, increasing skin elasticity and luster, delaying aging: removing wrinkles and firming skin, lightening true wrinkles, removing fine wrinkles and improving skin quality : Firming and lifting, shrinking pores, removing blackheads and pimples, diluting acne marks, improving oil secretion.

    Specifications

    SystemPicosecond Q-Switched Nd: YAG Laser
    Wave length1064nm 532nm 755nm 1320nm
    Width of pulse300~500ps
    Repetition Rate1~10Hz
    Spot Size2-10mm adjustable
    Light guide beam650nm red laser
    Output Energy1.Single pulse:1064nm/100-600mJ, 532nm/50-250mJ2.Double pulse:1064nm/100-1200mJ, 532nm/50-600mJ
    Laser deliveryImported 7 jointed nd yag laser articulated arm
    Cooling SystemsClosed-off water circulation +wind cooling
    laser modeMultimodal
    ElectricaAC220V/50Hz, AC110V/60Hz
    Machine dimensionsIncludes laser delivery:88.5*57*118cmWithout laser delivery:88.5*57*108.5cm
    Company Service
    Disclaimer
    The effects of using the instrument on different human bodies and in different environments are different. We do not guarantee 100% effectiveness.
    Payment and shipping
    After received full payment.(Bank transfer . Western union . Paypal ). Will prepare the machine (need around 3-5 days). Then we will using DHL /Fedex /UPS shipping machine to you (around 7-9 days arrived)
    Free Service
    We can add your logo in machine and machine screen for free. We can set machine language to you for free .
    Training
    We will provide the operation manual and the operation video to you. You can operate machine according it. Also supply one to one operation training service. It's very easy to operate, please don't worry .
    After Sales Service
    We have one years of free after-sales service and we provide all technical support for the life of the machine without worrying.
    Certification
    Our machines have passed CE certification, ISO 9001 quality certification.
    ZHENGZHOU MESCIEN ELECTRONIC TECHNOLOGY CO LTD
    Get In Touch
    Mescien offers customization. Committed to ODM&OEM customization services. Machines can be designed according to your needs.
    We look forward to working with you and meeting your unique requirements effectively. Contact us now to explore our comprehensive range of products and take your business to new heights!